Designed for the application of Liquid Minerals and Absence giving an even, well-blended coverage and allowing application to difficult parts of the face such as the nose area and inner corner of the eye.
Use dry for a heavier coverage of Liquid Minerals or wet with one of the facial spays to apply a lighter layer of Liquid Minerals. It also works well with In Touch Cream Blush or Highlighter.
The Foundation Brush is a chiselled, synthetic brush made from Taklon Nylon.
New brushes should always be cleaned prior to use. This will remove any chemical residue left behind from the sanitising process, and prevent any possible sensitivity. New brushes often shed. Do not be alarmed this is normal and will reduce after a few cleaning processes.
Clean brushes regularly with a mild shampoo or liquid soap, do not leave to soak as this will affect the ferrule and wooden handle. Rinse thoroughly and squeeze excess water out of the brush in the direction of the tip.
Do not leave to dry in an upright position as water will run down into the ferrule causing damage and the brush will lose it original shape. Dry flat on a towel, if possible leave the head of the brush over the edge of a counter so that air can circulate evenly during drying.